Application:

*  Wastewater Lift Station Urban Wastewater Treatment Plant

*  Septic tank drainage system on the first floor

*  Agriculture and animal husbandry wastewater treatment system

*  Domestic wastewater treatment systems for hospitals, schools, communities, etc.

*  Water treatment systems for food, paper, mining, textile, leather, chemical factories and other industries

*  Water purification system

Feature:

*  Electric motor

Squirrel cage induction motor, F grade insulation, protection grade P68.

*  Does not block the impeller

The impeller designed with the new non-clogging theory has a wide flow channel, smooth water flow, easy dirt passage and high efficiency. All impellers are calibrated for dynamic and static balance, which greatly reduces vibration and noise, runs smoothly, and has a long life.

*  Machinery Seal

The function of the mechanical seal is to prevent partial contact between the pumped medium and the motor. The dual mechanical seals work independently in series to provide double protection for the motor.

*  Automatic on-off device (optional equipment).

Make the installation, maintenance and repair of the pump quick and easy, without the need to remove the tank sewage first.

*  Leak detector

Install a leak detector in the oil chamber to detect turbid leaks caused by poor sealing or mechanical seal damage (<15kKW optional equipment, >15kW Standard equipment). The high-power water pump is equipped with a leak detector in the junction box and the motor cavity, which can send an alarm signal to the shallow leakage in the junction box and the motor cavity, so that the control system can protect the pump (non-standard equipment,> 132kW optional).

*  Overheat protector

Install an overheat protector in the motor to automatically detect overload, temperature rise and other conditions to avoid motor burnout due to motor overheating (<15kW optional equipment, 2 15kW standard equipment). Install an overheat protector in the bearing. When the bearing temperature rises to the cut-off temperature, the protector automatically cuts off the power supply to protect the bearing (non-standard equipment, optional for ≥18.5kW)

*  Water cooling jacket (optional equipment).

When the pump is working, the pressure in the pump cavity is used to make the liquid continuously enter the space between the water-cooled jacket and the motor housing to take away the heat generated by the motor, so as to ensure the normal operation of the pump at low water level (>18.5kW is optional).