Products
- Main Engine And Accessories
- Host Device
- Auxiliary Machinery
- Deck Machinery
- Materials
- Life-Saving Equipment
- Fire Alarm System
- Pump
Marine Pump
Jet Pump
Plunger Pump
Centrifugal Pump
Submersible Pump
Vortex Pump
Mud Pump
Vane Pump
Lubricating Oil Pump
Gear Pump
Hydraulic Pump
Fire Pump
Mixed Flow Pump
Sludge Discharge Pump
Impurity Pump
Dredging Pump
Metering Pump
Vacuum Pump
Magnetic Pump
Process Pump
Pneumatic Pump
Multi-stage Pump
Axial Flow Pump
Other Pump
- Hydraulic Lubrication
- Valve
Globe Valve
Gate Valve
Butterfly Valve
Relief Valve
Ball Valve
Fire Control Valve
Turn The Valve
Check Valve
Valve Remote Control/Valve Co
Observation/Sight Glass
Air Pipe Head/Mud Box
Solenoid Valve
Regulator Valve
Hand Valve
Needle Valve
Quick Closing Valve Series
Plug Valve
Storm Valve
Marine Valve Group Series
Other Valve Series
- Communication Navigation
- Environmental Protection
- Marine Electrical
Transformer
Power
Distribution Board
Lamp
Explosion-Proof Electrical App
Main Auxiliary Machine Remote
Centralized Bridge Console
Engine Room Control Console
Magnetic Starter
Charging and Discharging Plate
Telegraph
Relays
Scouting INST
Fishery Detector
Anemometer
Marine Kitchen Equipment
Marine Laundry Equipment
- Marine Hardware, Tools, Bearing
- Shipbuilding Equipment
- Metal Material
Cables and Accessories
Steel Plate
Ball Flat Steel
Steel Pipe
Metal Casting/Forging
Steel Wire Rope
Copper sleeve
centrifugal casting process brass sleeve
Copper plate
Copper half bearing bush
Copper splint
Copper nut
copper friction plate
Copper flange
composite gear
copper worm wheel
Copper roller
Wedge block
High Precision Oil Groove Sleeve Con Rod Shaft Bushing
Self lubricating copper sleeve
Bronze Pipe Copper Alloy Tube
- Non-Metallic Materials
- Surface Treatment
- Welding/Cutting/Inspection
- Marine Supplies & equ
- The Whole Ship
CUMMINS Engine 【Cummins 6.7L Turbo Diesel (2019)】
- Type:Cummins
- CAS No:
- Qty in 20' FCL:
- Min. Order:
- Packaging:
-
HO - w/ Aisin
SO – w/ 68RFE Auto
Horsepower
400
370
Torque
1000
850
Displacement
6.7L
6.7L
Number Of Cylinders
6
6
Bore
107 mm (4.21 in)
107 mm (4.21 in)
Stroke
124 mm (4.88 in)
124 mm (4.88 in)
Compression Ratio
16.2 :1
19:01
Engine Wet Weight
1060 lbs (62 lbs reduction from 2018)
1060 lbs (62 lbs reduction from 2018)
Aspiration
Turbocharged and Charge Air Cooled
Turbocharged and Charge Air Cooled
Fuel System
Bosch HPCR
Bosch HPCR
-
Overview:
For the first time, HD pickup buyers can get an impressive 1000 lb-ft of torque. This high-output (HO) rating is offered exclusively in the RAM 3500 equipped with the Aisin transmission option. The new high-output engine boasts 400 hp and 1000 lb-ft of best-in-class torque.
For RAM 2500 and 3500 (equipped with a 68RFE Auto) HP and torque have increased to 370 hp and 850 lb-ft to provide the right power for these models.
In addition to moving to a higher capability high pressure pump, several critical features were implemented to maintain the proven reliability and durability our customers have come to expect:
- A Compacted Graphite Iron (CGI) material for the block allows us to increase the cylinder pressure capability while reducing the overall weight by almost 60 lbs
- A new cast-iron cylinder head containing high-temperature capable exhaust valves actuated by all-new hydraulic lash adjusters in the block eliminates the need for valvetrain adjustment service intervals
- The heart of the engine is a higher-strength alloy crankshaft with a 10-bolt crank flange driving newly-designed forged connecting rods and new bearings which transfer power from the low-friction ring-wrapped pistons
- A new larger Cummins Holset variable-geometry turbocharger optimized with heavy duty bearings, and a new compressor-side housing is a key ingredient in the new ratings, pumping 33 pounds per square inch (psi) of fresh air into the engine
- The new fuel-delivery system includes a new 29,000 psi (2,000 bar) fuel pump and fuel rail with Cummins Filtration “filter in filter” NanoNet® technology
-
With the Hydraulic Lash Adjusters for 2019 we have eliminated the need to adjust the overhead completely and the Interval for the Fleetguard breather filter has been extended to 75,000 miles.
Maintenance Intervals for fuel filter replacement remains at 15,000 miles (24,000 km) as well as oil change interval stays at 15,000 miles (24,000 km) and is duty cycle based. This engine uses an oil change monitoring system which will display a message on the vehicle information center that alerts the driver to change the oil.
Don't forget that your new Cummins 6.7L Turbo Diesel engine requires low-ash engine oil; failure to use this type of oil can result in serious damage to the exhaust aftertreatment system in your vehicle. Be sure to purchase engine oil that meets CES 20081 standards.
Due to the new EPA regulations, owners of MY07 and later Cummins 6.7L turbo diesel-powered highway vehicles must refuel only with Ultra-Low Sulfur Diesel (ULSD) fuel meeting a 15-ppm on-highway requirement. Use of all other fuels is prohibited and may result in damage to the engine and/or the aftertreatment system. Be sure to purchase your diesel fuel from a reputable fuel station. For most year-round service, a high-quality No. 2 diesel fuel that meets ASTM specification D-975 (0.0015% sulfur level) will maintain good performance. EPA requires retail fuel stations that carry and dispense LSD and ULSD to label the pumps with a Low-Sulfur Highway Diesel Fuel and an Ultra-Low Sulfur Diesel label.
In addition, diesel fuel sold for off-highway use should not be used in any Cummins turbo diesel engine. This is due to off-highway fuels not necessarily meeting the fuel cleanliness or lubricity requirements for on-highway fuel specifications. Use of such off-highway fuels can result in accelerated wear to fuel system components.
For complete maintenance information, please consult your Owner's Manual or Operations and Maintenance Manual.