Home > Products >> Pump >> Metering Pump

Products

Email:sales@besqo.com

BESQO Marine supplies Metering Pump, select your favorite Pump to send us an inquiry email or leave us a message, we will contact you within 24 hours, for your quotation.

< >

Metering Pump--- HRP Series

Type:Metering Pump
CAS No:
Qty in 20' FCL:
Min. Order:
Packaging:

Your Inquiries will be replied within 24 hours.
Save Big Now, Discount Expires Soon.

Specification
Details
FAQ
Q&A

Specification

Pump & Drive units

Model	HRP-54V-1, HRP-54H-1	HRP-54V-2, HRP-54H-2
Flow rate	38 mL/min
Max. discharge pressure	0.2 MPa
Stroke rate	0 to 720 spm
Tube connection bore	Ø3 X Ø6, Ø4 X Ø6, Ø1/8 X Ø1/4
Power voltage	DC12V	DC24V
Power consumption	5.6V
Current value	1.5A	1.0A
Weight	0.5kg

• This specification is based on pumping ambient clean water at rated voltage.
• Flow rate is collected at the maximum discharge pressure and 720spm. The flow rate increases as a discharge pressure decreases.
• Allowable room temperature: 0 - 40 ºC • Allowable liquid temperature: 0 - 40 ºC
• Allowable voltage deviation: ±5% of the rated voltage 12VDC: 11.4V - 12.6V, 24VDC: 22.8V - 25.2V

Control unit

	Pulse control type	4 - 20mA control type	1 - 5V control type	Stop control type
Upper limit spm	720spm	720spm	720spm	720spm (Fixed)
Operation	One shot per signal (Synchronous operation) ^Note2	4-20mADC proportional operation to 0-720spm	1-5VDC proportional operation to 0-720spm	The pump stops during contact input.
Input signal	No-voltage contact or open collector ^Note1	Current: 4-20mADC	Voltage: 1-5VDC (Current capacity of 25mA or more)	No-voltage contact or open collector ^Note1

Note1: The maximum applied voltage to the contact is 12V at 5mA. When using a contact type relay, the minimum application load should be 5mA or below.
Note2: The external pulse signal is entered to run the pump over the upper limit spm, the signal is cancelled.