GM-V Series Gear Pump Parameters

Sealless, corrosion resistant gear pump

The wetted parts of GM-V Series Gear Pump incorporate an entirely non-metallic structure, i.e., no metal is used in these parts at all. Coupled with a leakage-free, magnetic drive method, this structure enables the pump to handle a wide range of corrosive chemicals, including acids and alkalis.

Superior durability thanks to SiC gear

The pump uses an SiC ceramic gear that excels in wear resistance. Free of problems caused by galling or seizure, the pump can be run safely at high speed.

Pulsation-free, and metering injection

This is an internal gear pump of the pulsation free, high-speed operation type. The discharge quantity is proportional to the pump speed (rpm), so that when controlled by an inverter, the pump can inject or transfer liquid without precisely pulsation.

Small flow rate, high head, and self-priming

The pump is manufactured to small-flow-rate specifications suitable for chemical dosing pumps. In addition, the pump is capable of a maximum 1 m of self-priming.

Specification

Max. discharge capacity	18.0/21.8 L/min
Max. discharge pressure	0.5 MPa
Max. speed	1410/1700 rpm
Main materials	PVC, SiC, CFRETFE
Required power range	0.2 to 0.75 kW
Liquid temp. range	0 to 50 C deg.
Viscous liquid	0.5 to 50 mPa•s
Slurry liquid	Cannot be handled.
Sealing method	Seal-less construction

Besqo Marine offers a wide range of Pump. For more information , leave message or send an email to sales@besqo.com.