News
We're here to help
For product information and pricing, chat with sales agent:
News
GM501 Output Module Introduction
GM501 output module is an output module with address coding and broadcast signal switching function specially designed for various use environments.
The start and stop signal sent by the controller can control the action of the field output module through the alarm bus. If it is started, the corresponding broadcast signal is switched to the passive device (horn) by the module.
GM501 output module can transmit normal monitoring and fault signals to the alarm bus, which transmits signals and relay contact switching output in the mode of switching quantity. The module has the function of line break and short circuit fault detection.
|
Technical standard |
Meet the requirements of GB 16806-2006 |
|
Bus Voltage |
DC18～26V |
|
Power Voltage |
DC24V |
|
Monitor current |
Alarm bus T+, T-: ≤300uA |
|
Alarm current |
Alarm Bus T+, T-: ≤2.6mA |
|
Confirmation lamp (red) |
Run/input action lights (red): |
|
Line system |
Two alarm buses: T+, T- (non-polar), |
|
Contact capacity |
DC30V 2A(AC120V 1A） |
|
Number of contacts |
2 pairs of normally open, normally closed contact synchronous conversion |
|
Operating temperature |
-10℃～+55℃ |
|
Relative humidity |
≤95%（40℃） |
|
Dimensions |
86mm×40mm×86mm（L×W×H） |
|
Weight |
About 160g |
|
Color |
White |
Besqo Marine offers a wide range of Fire Alarm System. For more information , leave message or send an email to sales@besqo.com.