News
We're here to help
For product information and pricing, chat with sales agent:
News
The RM5Ei input/Output Module Introduction
The RM5Ei input/output module is a control module with address coding specially designed for various use environments.
Low power consumption, bus system (two buses, polarity), 24V power line support, can see the same fire detector hanging on the alarm bus, convenient construction, flexible use.
It can be used as the linkage control executive component between the controller and the controlled device, and can receive the feedback signal after the controlled device action.
The relay outputs two pairs of normally open and normally closed transfer contacts, among which K1 and K2 normally open contacts have the function of open fault monitoring.
|
Technical standard |
Meet the requirements of GB 16806-2006 |
|
Operation Voltage |
DC18～26V |
|
Monitor current |
≤380uA |
|
Alarm current |
≤2.6mA |
|
Confirmation lamp (red) |
Run/input action lights (red): |
|
Line system |
Two alarm buses: T+, T- (with polarity), |
|
Contact capacity |
DC24V 2A |
|
Number of contacts |
Two pairs of normally open, normally closed contact synchronous conversion, |
|
Operating temperature |
-10℃～+55℃ |
|
Relative humidity |
≤95% |
|
Relative humidity |
85mm×34mm×120mm（L×W×H） |
|
Weight |
About 100g |
|
Color |
White |
Besqo Marine offers a wide range of Fire Alarm System. For more information , leave message or send an email to sales@besqo.com.