GM5Ei Output Module Introduction

GM5Ei output module is an output module with broadcast signal switching function which is designed specifically for various use environment.

The start and stop signal sent by the controller can control the action of the field output module through the alarm bus. If it is started, the corresponding broadcast signal is switched to the passive device (horn) by the module.

The GM5Ei output module can transmit the normal monitoring and fault signals to the alarm bus, which transmits the signals in the mode of switching quantity and the relay contact switching output. The module has the function of line break and short circuit fault detection.

Product Features：

Low power consumption. The T+, T-alarm bus and the DC24V power bus are non-polar designs and can be regarded as the same fire detector connecting to the alarm buswhich is convenient for construction and flexible in use.

It can be used as the linkage control execution component of the controller and the controlled device, and can also detect the disconnection and short-circuit fault signals of the playback device (speaker) and the connection line.

The relay outputs two pairs of normally open and normally closed transition contacts (AC125V/1A), which can switch background music signals and fire broadcast signals.

Besqo Marine offers a wide range of Fire Alarm System. For more information , leave message or send an email to sales@besqo.com.