JB-MG-J4100 Gas Fire Extinguishing System Control Panel Introduction

Product Description

JB-MG-J4100 gas fire extinguishing system control panel is a new generation of industrial alarm fire extinguishing device which is newly introduced by the company and meets GA61-2010 "General technical conditions for driving and control devices for fixed fire extinguishing systems".

The control panel of J4100 gas fire extinguishing system is based on high-performance PLC such as AB/SCHNEIDER/SIEMENS. The site is equipped with a differential temperature probe, a point-type smoke detector, a combustible gas detector, and a flame detector. 

Cable type temperature detector, industrial start-stop button, pressure transmitter and other components, and gas fire extinguishing device, water mist fire extinguishing device, foam fire extinguishing device, etc., constitute a complete fire, gas detection alarm fire control system (Fire Alarm and Gas Detector System). 

The J4100 accurately detects the danger of fire and flammable gas through the front-end fire detector, triggers the alarm signal from the corresponding alarm device, and determines the alarm level and controls the necessary linkage equipment according to the severity level of the accident, and starts the fire control. Process, implement automatic firefighting, timely control, and eliminate dangerous situations, thus avoiding major disasters, reducing damage to personnel and equipment and environmental impact. 

JB-MG-J4100 gas fire extinguishing system control panel can be widely used in industrial sites of marine operating platforms, chemical plants, oil refineries, substations and metal processing plants to provide safety protection for metallurgical, petroleum, chemical, electric power and other production sites.

Features

1 Select PLC with high-speed running bus as the main control system, with quick response and timely action;

2 Adopt point-to-point signal acquisition and control mode for main equipment, single-point I/O fault, only adversely affect individual equipment, and hinder the overall operation of the system;

3 10.4 inch color touch screen and fire-fighting HMI human-machine interface software, easy to operate, clear and intuitive display;

4 Rich bit instructions, communication instructions, timer instructions, counter instructions... can implement complex logic control;

Such as: main release / continuous release delay, valve operation in place automatically stop, after the isolation valve is opened, it is forbidden to start fire extinguishing...

5 Manual, automatic, remote and other control methods, through the serial port or Ethernet interface, can realize the status of remote monitoring and control system related equipment;

6 It has various fault self-diagnosis functions such as short circuit of equipment connection line, open circuit, grounding, and undervoltage of power supply;

7 Comply with GA61-2010 "General technical conditions for driving and control devices for fixed fire extinguishing systems"

Specifcation:

1, AC input voltage: AC220V;

2, DC input and output voltage: DC24V;

3, can receive 4-20mA signal of the field detector;

4, can receive field sensor thermal resistance, thermocouple signal;

5. Support PPI, MPI, PROFIBUS, Modbus RTU, ModbousTCP protocol;

6, support for custom protocols;

7. Each multi-line control panel can control 8 devices;

8. Each fire-extinguishing operation panel can control 4 areas.

Besqo Marine offers a wide range of Fire Alarm System. For more information , leave message or send an email to sales@besqo.com.