News
We're here to help
For product information and pricing, chat with sales agent:
News
Txf-93-1 Fire Protective Clothing Parameters
Txf-93-1 fire protective clothing is made of composite material of fiber fabric and aluminized film.Clothing includes jacket, trousers, gloves, helmet and cover feet, without asbestos, with light weight, high strength, flame retardant, high temperature resistance, heat radiation resistance, wear resistance, folding resistance and non-toxic and harmless to human body and other advantages, can effectively protect firefighters and high-temperature operation personnel not to be burned by flames, high temperature.
The product has been tested by the national fire equipment quality supervision and testing center and is qualified to meet the requirements of ga88-94 "performance requirements and test methods for fire insulation clothing".Marine protective clothing approved and inspected by China classification society.
The main performance
1. Flame retardant property damage length is less than 100mm, smolder time is less than 5 seconds, and reburning time is less than 2 seconds.
2, thermal radiation resistance in 10 kw/m2 after 30 s under the radiation of heat radiation, its surface temperature is not more than 25 ℃.
3. The anti-seepage performance is greater than 4000Pa.
Precautions for use
1, as usual to wear a coat and trousers.Fire boots should be worn in the trousers tube, and then buckle the buckle on the trousers tube mouth to prevent water
And the molten material is poured into the boot.
2, The heat insulation clothing has the function of heat insulation and flame retardant, but it cannot be put into the flame zone or too close to the concentrated heat source to avoid
Avoid direct contact with flame and molten metal to prevent damage to clothing and human body.
3, remove clothing dirt can be wiped with a damp towel, especially dirt can also be used soft cloth dipped in a little prepared
The washing solution is scrubbed on the surface and then dried thoroughly.Do not immerse the garment in water or rub it vigorously to prevent aluminum plating
Film layer, off.
4, fire insulation clothing should be stored in a dry and ventilated place, regular exposure, to prevent mildew and damage.
-
The international code
The factory code
type
specifications
Number of packages
The weight of the
Packing size
note
330901
JH10-1
Boat use
M、L、XL
1
7
42*31*37
Provide CSS certificates
JH10-2
Land use with straps
M、L、XL
2
13.5
55*44*37
Factory certificate, certificate of compliance
JH10-3
Land use, no straps
M、L、XL
4
16
42*31*37
Factory certificate, certificate of compliance